>> Product description
Solar road stud are also named solar raised pavement marker, solar LED road marker and solar cat eye. It is nothing but an “Active Road Stud” with automatic switching function, realized using the combination of a small solar panel, re-chargeable cell, and LED driver circuitry. This type LED road marker clearly visible traffic guidance in all weather conditions. After being energized by the sun, our road stud automatically starts to flash when night falls or with the onset of inclement weather. Solar Road Studs are specifically used to improve safety, reducing accidents on the road by providing information to drivers about the road ahead directly in their natural field of vision
| Product Name | Solar Road Stud |
| Item No. | HT-RS-SA6 |
| Solar panel | 2.75V/200mA for Ni-Mh battery,5.5V/100mAh for Lithium battery |
| Battery | 1.2V/600mAh、1.2V/1300mAh、1.2V/1500mAh NI-Mh battery or 3.2V/500mAh Lithium battery |
| Working Model | Flashing or Steady |
| LEDs | 6pcs super brightness Φ5mm LEDs |
| Color | Yellow,Red,Blue,Green,White |
| Visual Range | more than 800meters |
| Controlling light intensity | 400-500Lux |
| Working temperature | -20℃～+60℃ |
| Waterproof | IP68 |
| Working Time | More than 200hours for flashing model,For steady type:50 hours for 600mah Ni-mAh battery,100 hours for 1300/1500mah Ni-mAh,72 hours for Lithium battery |
| Lifetime | 3- 5 years for Ni-mAh battery,more than years for Lithium battery |
| Compress Resistance | >30T |
| Size | 125*107*25mm |
| Material | Aluminum+PC+PMMA reflector |
| Carton Size | 54*28*26cm |
| N.W/G.W | 28/29KG |
Solar road stud are packed by box,2pc/box,30 boxes per carton,we can also packed the road stud as your request,such as by pallet
>> Solar road stud installation process
1. Mark the proper position for the road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry.
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
5. After 4 hours of installation, the glue will dry completely.
6. It can also be fixed on both sides with bolts.
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
5. After 4 hours of installation, the glue will dry completely.
6. It can also be fixed on both sides with bolts.
>> Why choose SA6 Solar road stud light
- USA brand sunpower flexible solar panel high conversion and charge efficiency ,Compression resistant and not easy to damage;
- Program PCB has high stability ;
- Embedded reflector design, not easy to fall off, good waterproof performance;
- Anchor holes or adhesive bond for dual fixation ;
- High-temperature resistance battery and circuit,can be used on the equator.
>> Application
>> Certificate
>>
WISTRON is committed to providing high quality solar spike, road cones, speed bumps and other road traffic safety protection products, which are favored by customers around the world. We have 16 years of factory and have a professional R & D team, to provide you with one-stop service, support customization and offline factory inspection. WISTRON only do high quality solar spike, our timely delivery, service quality. Welcome your consultation!
